SuprSeal Severe Lost Circulation Material (LCM) is an excellent product
for overcoming problems with vugs, fracs and those difficult lost circulation problems. And it’s manufactured right in the oil patch.
Performance Benefits:
Complete lost circulation
system - No other additives
required
Easy to use - Only add water
and mix well
Mixes well in a 4“ hopper
Makes an excellent slurry
Reduces the need for cement “top” jobs through effective circulation of cement to surface
Restores circulation to retain
borehole stability
Has been pumped through bit
nozzles 13/32” and larger*
* NOTE: WelDril does not recommend
pumping SuprSeal through the bit
nozzles.
Pol-E-Flake is inert and may be used in any common drilling fluid or cement system as a preventive filler while drilling a potential loss zone, and may be used in combination with other lost circulation products to make a remedial plugging slurry.
Performance Benefits:
Produces maximum mat sealing at the face of the well bore wall
Made from polyester film sized to 3/8”
About half the density of the most common cellophane flakes
Lends itself very well to dry blending
Will not cause the pump to
cavitate
Kol-Seal is a lightweight granular solid with a specific particle-size
distribution for maximum bridging efficiency. It provides an economical
cementing system with low-density lost circulation control and a
superior scouring action.
Performance Benefits:
Insoluble in oil
Does not soften at high
temperatures
Does not appreciably change
the thickening time of cement
Provides slurries that have
higher compressive strengths
at all ages, compared to
slurries containing other lost-
circulation and extending
additives
Compatible with most other
cement additives
Does not require complicated
mixing equipment or
procedures